Panasonic DMR-EZ49VEB

72
VQT2J51
System Settings
3, 4 select “Others” > 1 > 3, 4 select item >
> Others > Setup
(> 66, Accessing the Setup Menu)
All factory default settings are indicated with “Underlined” text.
Others
Remote Control (> 82)
[DVD 1] [DVD 2] [DVD 3]
Clock (> 14)
Owner ID (> 13)
In order to prevent another person from using this unit if it is stolen,
you can set a PIN number and input your personal information.
Once the PIN number has been set, you cannot return to the factory
preset. Make sure not to forget this.
≥PIN number ≥Name ≥House No. ≥Postcode
F
U
N
C
T
O
N
M
E
N
U
OK
Setup
Picture
Sound
Display
Connection
Tuning
Others
RETURN
SELECT
TAB
Disc
Clock
Remote Control
DVD 1
Owner ID
Standby Settings
System Update
Initialize
VHS
Standby Settings
≥Press [OK] to show the following settings.
Power Save in Standby
[On] It will go into the Power Save in Standby mode
when the unit is in standby mode.
[On Timer] “Power Save in Standby” is set to activate
during the setting time period. (> below)
[Off] It is possible to start quickly from the standby
mode. (Quick Start mode)
1 Press [3, 4] to select “On Timer” and press [OK].
2 Press [3, 4] to set the start time (hour).
3 Press [2, 1] to select the stop time and press
[3, 4] to set the stop time (hour).
4 Press [OK] when you have finished the settings.
≥You can also use the numbered buttons for setting.
≥You can set start and stop time by the hour.
≥If the clock has not been set, “Power Save in Standby” is
activated at all hours.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be turned off
once the set time has passed.
[30 minutes] [1 hour] [2 hours] [4 hours
]
[6 hours]
[Off] The unit will not automatically turn off.
Auto Standby after OTR
[On] This unit is turned to standby mode when this unit is not
operated for approximately 5 minutes after completing
One Touch Recording (> 29).
[Off]
Auto Standby after Copy
[On] This unit is turned to standby mode when this unit is not
operated for approximately 5 minutes after completing
copy (> 57-61).
[Off
]
RF OUT ( Aerial Signal )
[On] Broadcast signals are output from this unit.
TV can receive broadcast signals even if this unit is in
standby mode when connecting TV with this unit using
the RF cable (> 10).
[Off] Press [2, 1] to select “Yes” when the confirmation
message is displayed.
Broadcast signals are not output from this unit to reduce
standby power consumption.
≥Power consumption is lowered additionally when
“Power Save in Standby” is activated.
≥If this unit turns into standby mode when connecting TV
with this unit using the RF cable, proper broadcast
images do not appear on TV.
Power Save in Standby
Power Save
On Timer
To
6
:00
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
AV2 loop-through in standby.
Press OK to manually set the period of
Power Save.
0 9
Number
OK
RETURN
SELECT
CHANGE
DMR-EZ49VEB_VQT2J51.book 72 ページ ２００９年１２月２１日 月曜日 午後５時４０分