Getting started
VQT4C70
14
Connection
• The HDMI connection supports VIERA Link “HDAVI
Control” (> 64).
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
• Connect to terminals of the same colour.
• 3D video playback is not possible with this connection.
• Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Power Save in Standby” is
activated and “RF OUT ( Aerial Signal )” is
set to “Off”)]
Other TV connections
Audio/Video cable
(supplied)
TV
DMRPWT520GL_eng.book 14 ページ ２０１２年２月９日 木曜日 午後６時１５分
To Next Page
Loading...
