Recording
VQT4C70
29
Timer recording
To use TV Guide system
Refer to “Using TV Guide system”. (> 24)
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 30.
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“F” disappears)
Operation during Recording
Refer to “Operation during Recording”. (> 28)
• Some broadcast may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 30)
• You can set the start and finish time to make the timer
recording work successfully. (> 68, 73, Timer Record Start
Buffer, Timer Record Stop Buffer)
1 On the TV Guide screen:
Press the blue button.
2 Select the item, then press [OK].
To return to the previous TV Guide list
Select “All Digital Channels” in step 2.
• Category may not be assigned correctly depending on the
programme information.
• This operation will only record to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press the
red button.
The timer icon (red) is displayed.
Page Down
Information
Page Up
Category+24hrs-24hrsTimer Rec.
SUN 01.01
TV Guide
8:00 AM - 9:45 AM
Sat 01.01.2012 8:05 AM
Category: All Digital Channels
8:00 AM AM AM AM AM AM8:30 9:00 9:30 10:00 10:30
OK
RETURN
Category: All Digital Channels
30 AM AM AM10:00 10:30
To select the programmes of a specific
category
DMRPWT520GL_eng.book 29 ページ ２０１２年２月９日 木曜日 午後６時１５分
To Next Page
Loading...
