Panasonic DMR-PWT520 - Operation during play

Playing back video
VQT4C70
38
Operation during play

• Depending on the media and the type of file, some
operations may not be possible.
• Depending on the media, it may take time for the menu
screen, pictures, sound, etc. to start.
• Discs continue to rotate while menus are displayed. Press
[STOP ∫] when you have finished playback to protect the
unit’s motor, your TV screen, etc.
Press [STATUS ] twice.
e.g.,
Press [STOP ∫].
Resume play function
Press [PLAY/a1.3 1] to restart from the stopped
position.
• The resume play function does not work
depending on the disc.
• Stopped position
[HDD] [USB_HDD]:
Stopped position for each title is memorized.
Discs:
Only previous stopped position is memorized.
The position is cleared if the tray is opened or
the unit is switched to standby mode.
[HDD] [USB_HDD] [SD]
Press and hold [PLAY/a1.3 1].
• Press again to return to normal speed.
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.

• The speed increases up to 5 steps.
([+R] [+RW]: Up to 3 steps)
• DivX, MKV, MP4 and MPEG2 ([USB]): Audio is not heard
during all levels search.
Press [PAUSE ;].
• Press [PLAY/a1.3 1] to restart play.
While paused, press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.

• The speed increases up to 5 steps.
• DivX, MKV, MP4 and MPEG2 ([USB]): This function is not
effective.
• [BD-V], AVCHD ([SD]): Forward direction
[SLOW/SEARCH 5] only.
General operations
Status messages
Stop
8:05:50 AM 01.01.2012
T1 0:05.14 DR
0:30.00
Remain HDD
Quick View
Search
Pause
Slow-motion
DMRPWT520GL_eng.book 38 ページ ２０１２年２月９日 木曜日 午後６時１５分