Copying video
VQT4C70
46
Copying titles
To register the external HDD (USB HDD)
Refer to “Registering the external HDD
(USB HDD)”. (> 62)
• Following operations cannot be performed while copying.
- playback of 3D BD-Video in 3D
- playback of DivX and MKV file
- playback of photo
- playback of USB memory
§
§
The title in the source media will be deleted.
1 Connect the USB HDD.
2 Press [DRIVE SELECT] to select “HDD”,
then press [DIRECT NAVIGATOR].
3 Select the title, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
4 Press the blue button.
5 Select “Yes”, then press [OK].
• If you select “No”, you can change the
selection. (> 47)
Start Time
Prog.Type:
Rec time
Channel Date Title Name
Movies
9:00 AM
6 Set other settings, then press [OK].
e.g.,
(> 47, Setting the copying options)
7 Select “Yes”, then press [OK].
The unit will be turn to standby after copying is
completed. Please set copy setting and press OK.
OK
RETURN
Automatic Standby after Copy
Off
DMRPWT520GL_eng.book 46 ページ 2012年2月9日 木曜日 午後6時15分