Panasonic DMR-PWT520 - Page 92

Troubleshooting
VQT4C70
92
Troubleshooting guide
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
connection or
Wireless setting:
“Fail”
• Connection
of the LAN
cables
(> 17)
• Settings of
the hub and
router
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
• Connection
and settings
of the hub
and router
• Settings of
“IP Address /
DNS
Settings”
(> 68, 78)
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Pass”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Home
network
available”
3. Connection to
gateway:
“Fail”
Easy Network Setting ( Internet Connection
Test )
Display Check the following
Cannot find the
server. (B019)
• “Primary DNS” and
“Secondary DNS” settings
of “IP Address / DNS
Settings” (> 68, 78)
No connection
could be made to
the server. (B020)
• The server may be busy or
the service may have been
suspended. Please wait a
few moments, and then try
again.
• Settings of “Proxy Server
Settings” (> 68, 78) and the
router.
DMRPWT520GL_eng.book 92 ページ ２０１２年２月９日 木曜日 午後６時１５分