Panasonic DP-4530 - Using Manual Number Dialing

Sub-Addressing
70
Use to separate the Telephone number and the Sub-address.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. separtes the Sub-address from the Telephone number and is indicated by an
"s" in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
Using Manual Number Dialing
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
2
Enter the telephone number, press then enter the Sub-address
(up to 20 digits).
(Up to 36 digits including telephone number, pauses, spaces, FLASH and Sub-
address)
Ex: Telephone number = 5551234, Sub-address =2762
Enter as:
3
The document is stored into memory and your machine starts to dial the
number of the station and sends the document(s) with Sub-addressing
information.
SUB-ADDR
SUB-ADDR
5 5 5 1 2
3
4
SUB-ADDR
2 7
6
2
OK
Memory Transmit STN(s):001
Add More STN(s)
Press START To Send
AFRICA
ASIA
AMERICA
ANTARTICA
APOLLO
BERLIN
BRAZIL
SUB-ADDR