Panasonic DP-8016P

77
Network Scanner
Turn On the Power Switch
(Machine and the PC).
Input the Network Address
(Machine and your PC).
● IP and Gateway Address
∗
IP: 192.168.0.1 (Machine)
192.168.0.2 (Your PC)
Subnet Mask: 255.255.255.0
(Machine & the PC)
● How to input the network address:
For your Machine: See page 66
For your PC: See below
For more detailed information, refer to Windows OS operating instructions manual.
For Windows 2000
9
1
4
5
67
Right click "My Network
Places" and select
"Properties".
2
Right click "Local Area
Connection" and select
"Properties".
3
Select "Internet
Protocol (TCP/ IP)".
Click "Properties".
Click "OK".
4
7
5
Select "Use the
following IP address"
then, Input IP Address
and the Subnet Mask.
Click "OK".
6
For Windows XP
1
Open the Control Panel.
3
2
2
Select "Switch to Classic
View", if using the
Category View Mode.
Select "Network
Connections".
3
4
4
Right click "Local Area
Connection Enabled ........"
and select "Properties".
5
Select the "Internet
Protocol (TCP/ IP)".
Click "Properties".
Click "CLOSE".
6
5
6
7
Select "Use the following IP
address" then, Input IP
Address and the Subnet
Mask.
8
7
8
5
9
Click "OK".
3
3
4
5
"OK" will be changed to "CLOSE".
NOTE:
∗
If you use the DHCP
server, select to disable
the DHCP server.
Machine: See page 55
Your PC: Consult your
System
Administrator.