Panasonic DP-8016P

58
Function
■ Copier Settings (Continued)
11 SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT
1:NON-SORT / 2:SORT
12 1→2 BINDING DEF. Selects the binding location for 1→2 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
13 2→1 BINDING DEF. Selects the binding location for 2→1 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
14 BOOK → 2 DEFAULT Selects the page layout of the Book→2 copy. 1:BOOK FORMAT
1:BOOK FORMAT 2:FLIPPING
<Sub-Function> 2:PAGE ORDER
1:FACING / 2:FLIPPING 1:L→R
2:PAGE ORDER
<Sub-Function>
1:L→R / 2:R→L
15 IMAG. REPEAT DOT. Selects whether to print the dotted line. 2:PRINT
1:NONE / 2:PRINT
16 2 PAGE MODE DEF. Selects the page order of 2 page copy. 1:L→R
1:L→R / 2:R→L
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD =
No.
Modes Function
Initial
Setting
00 COPY SETTING LIST Prints the copier settings list.
PRESS SET TO PRINT
01 ORIGINAL (HOME) Selects the halftone default setting. 2:TEXT/PHOTO
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
02 TEXT CONTRAST Selects the default contrast setting for the Text mode. 3
1-5
03 T/P CONTRAST Selects the default contrast setting for the Text/Photo 3
mode.
1-5
04 PHOTO CONTRAST Selects the default contrast setting for the Photo mode. 3
1-5
05 MAX. COPY SETTING Select the maximum number of copies allowed per job. 999
1-999
06 M1,SIZE Inputs the frequently used size in job memory 1. 70 x 160 mm
Procedure:
Input X size (5 - 432) and press SET Key then,
input Y size (5 - 297) with Keypad.
07 M2,SIZE Inputs the frequently used size in job memory 2. 95 x 220 mm
Procedure:
Input X size (5 - 432) and press SET Key then,
input Y size (5 - 297) with Keypad.
08 MEM. FULL ACTION Selects the action to take during memory full condition. 1:PRINT
1:PRINT / 2:CANCEL
09 TONER SAVE (TEXT) Selects the Toner Save Level to use for the Text mode. 1:NONE
1:NONE / 2:LEVEL1 / 3:LEVEL2
The following Parameter Settings require the input of the Key Operator Password:
■ Copier Settings (For Key Operator)
No.
Modes Function
Initial
Setting