Panasonic DP-8060 - Editing the Tandem;Remote Machine; Deleting the Tandem;Remote Machine

16
Making Copies
Basic Menu
■■
■■
■ Editing the Tandem/Remote Machine
To edit the registered machine’s settings
(IP Address, machine name or key name).
1
Open the Function Parameters screen by following the
procedures 1 to 4 on pages 14 and 15.
4
Enter the new IP
Address, same as for
the Parameter
Registration (Tandem
Destination) procedure
(see pages 14 and 15).
Enter the machine and
key name, same as for
the Parameter
Registration (Tandem
Destination) procedure
(see pages 14 and 15).
5
■■
■■
■ Deleting the Tandem/Remote Machine
1
4
To delete the registered machine.
Open the Function Parameters screen by following the
procedures 1 to 4 on pages 14 and 15.
Downloaded From ManualsPrinter.com Manuals