Panasonic DVCPRO50 AJ-D960EG - Page 110

110 (E)
RS-232C interface
VTR
operation
Send command
Return (completion)
message
Supplementary notes
[STX] OBF [ETX]
STANDBY
OFF
[STX] OBF [ETX]
This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX]
SHTL
REVERSE
[STX] OSR [ETX]
This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:
[STX] OBN [ETX]
STANDBY
ON
[STX] OBN [ETX]
This command is setting the VTR to standby ON.
speed data
STILL (STILL)
×0.03 (×0.03)
×0.1 (×0.1)
×0.2 (×0.2)
×0.5 (×0.5)
×1(×1)
×2(×1.85)
×4.1 (×3.1)
×9.5 (×9.5)
×16*
1
(×16*
1
)
×32*
1
(×32*
1
)
*
1
This speed differs according to the setting selected for setup
menu No. 101 (SHTL MAX).
The value for the DV/DVCAM format is shown in parenthesis ( ).