118 (E)
Specifications
GENERAL
Power supply: AC 220 – 240 V, 50 – 60 Hz
Power consumption: 280 W
Operating ambient temperature: 5°C to 40°C
Operating ambient humidity: 10% to 90% (no condensation)
Weight: 20 kg
Dimensions (W × H × D): 424 (max. 435.4) × 175.2 × 415 mm
(Not including the support legs, connectors, and JOG dial)
Recording format: DVCPRO50/DVCPRO format selectable
Recording video signal: 625i/525i selectable
Recording audio signal: DVCPRO50; 48 kHz 16-bit 4 channels
DVCPRO; 48 kHz 16-bit 2 channels
Recording tracks: Digital video audio; helical track
The time code is recorded in the sub-code area.
Cue track; 1 track
Control track; 1 track
Tape speed: 67.708 mm/sec (625i)
67.640 mm/sec (525i)
Recording time: 92 minutes (using the AJ-5P92LP)
33 minutes (using the AJ-5P33MP)
Tape: Metal tape
FF/REW time: Less than 3 min (with AJ-5P92LP)
Less than 2 min (with AJ-5P33MP)
Digital slow: DVCPRO50/DVCPRO; –1× to +2× speed
DV/DVCAM; –1× to +1× speed
Editing accuracy: ±0 frames (using the time code)
Tape timer accuracy: ±1 frame (using the continuous CTL signal)
Servo lock time: Less than 0.5 sec (colour framing/standby ON)
VIDEO
Digital video
Sampling frequencies: 625i/525i; Y; 13.5 MHz, P
B/PR; 6.75 MHz (DVCPRO50)
Quantizing: 8 bits
Video compression method: DCT + adaptive sampling + variable-length encoding
Video compression rate: DVCPRO50; 1/3.3
DVCPRO; 1/5
Error correction: Reed-Solomon product code
Video recording/playback bit rate: DVCPRO50; 50 Mbps
DVCPRO; 25 Mbps
Digital IN/Analogue Component OUT
Video bandwidth: 625i; Y; 25 Hz to 5.5 MHZ (±0.5 dB), 5.75 MHZ (–2.0 dB)
P
B/PR; 25 Hz to 2.5 MHZ (±0.5 dB), 2.75 MHZ (–2.0 dB)
525i; Y; 30 Hz to 5.5 MHZ (±1.0 dB), 5.75 MHZ (–2.0 dB)
P
B/PR; 30 Hz to 2.5 MHZ (±1.0 dB), 2.75 MHZ (–2.0 dB)
S/N ratio: Better than 60 dB
K factor: Less than 1%
Y/P
B, PR delay: Max. 10 ns
Video input connector
Analogue component input
(option): BNC × 3 (Y, P
B, PR)
Y; 1.0 Vp-p, 75Ω
P
B/PR; 0.7 Vp-p, 75Ω (100% colour bar, 0% black level)
Analogue composite input (option): BNC × 2, loop-through, 75Ω on/off
Reference input: Analogue composite, BNC × 2, loop-through, 75Ω on/off
Serial digital component input: Complies with SMPTE 259M-C/EBU Tech.3267-E standard, BNC × 2, active through
SDTI input (option): Complies with SMPTE 305M/321M standard, BNC × 2, active through (also serves as SDI
input connector)
To Next Page
Loading...
