Panasonic DVD-RV65

I
"O
q)
"o
2"3 _.__RETURN
_ Numeric
buttons
1
ACTION
0 t _,_
0 2Rati.g. L.,eis'_
ill 3 MenuLanguage English
Ill 4On-ScreenMessages
all 5 PL Display edght
!_ 6TV Aspect 4:3
_1_ 7 Digital Audio Output
_1, 8SpeakerSetting 2-channel
9Other Seffings
PressRETURNtoexit
Changing initial settings
Change the initial settings to suit your preference and to suit the unit
to the environment in which it is being used.
1
2
3
Press [ACTION] in the stop mode.
The initial settings screen is displayed.
Press the cursor buttons [A, T} to se-
lect the item and press [ENTER].
Each item that can be modified is displayed,
1 Disc Languages (m page 27)
Change the scundtrack language, subtitle language and
the language used in the disc's menu to be used for every
disc played•
2 Ratings (.o page 28)
Change the ratings level to prevent play of discs, skip
violent scenes, or replace scenes with others by entering a
password. This is also called a parental lock,
3 Menu Language (m page 29)
Change the language used for the ee-screen displays and
initial settings menus.
4 On-Screen Messages (-, page 29)
Choose whether "Play", "Still" and other displays will be
displayed or not, and the color and position of these dis-
plays as well as On-Screen Menu Icons.
5 FL Display (-, page 29)
Change the brightness for the FL display.
6 TV Aspect (=t page 10)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output (=Ppage 36)
Change the settings to suit the type of digital equipment
you have connected.
8 Speaker Setting (-, page 38)
Change the settings to suit the type of speaker you have
connected.
9 Other Settings (,,, page 30)
Choose the kind of picture shown when play is paused,
and adjust various other settings to enhance your viewing
experience.
Press the cursor buttons [A, V} to se-
lect the setting and press [ENTER].
eSome items require additional steps. (See the respective
pages.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [ACTION] or [RETURN].
For your reference
eThe numeric buttons can also be used instead of the cursor buttons
[&, T} for selecting items or settings. Pressing [ENTER) is not nec-
essary.
I=1