Why is there no picture on my Panasonic DVD-RV32?
If there is no picture on your Panasonic DVD Player, ensure that the equipment is connected properly and turned on. Also, make sure the television’s video input setting is correct.
Why won't my Panasonic DVD Player start even when I press PLAY?
If your Panasonic DVD Player doesn't start when you press PLAY, condensation may have formed. Wait 1 to 2 hours for it to evaporate. Also, you can only play DVD discs if the region number is the same as, or includes the same region number as the unit, or if the DVD is marked “All“.
What to do if no operation can be performed with the remote control for Panasonic DVD-RV32 DVD Player?
If you cannot perform any operations with the remote control of your Panasonic DVD player, check that the batteries are installed with the correct polarities (+ and -) and are not worn out. Also, ensure you are pointing the remote control in the direction of the unit.
Why is there no sound or distorted sound from my Panasonic DVD-RV32?
If you experience no sound or distorted sound from your Panasonic DVD Player, first check the connections and the volume on the connected equipment. If the DVD is recorded in DTS, no sound will be output, so try selecting another soundtrack. Also, turn ADVANCED SURROUND off, if it causes distortion.
What to do if the picture shown on the television is not normal with Panasonic DVD-RV32?
If the picture shown on the television is not normal when using your Panasonic DVD Player, go to the VIDEO menu in the SETUP screen and change “TV Aspect“ to suit your TV. Ensure that the unit is connected directly to the television and not through a video cassette recorder. Also, ensure the 'AV Output (Scart)' selection is correct for the TV input. If you have connected to your television through the video output terminal, go to the VIDEO menu in the SETUP screen and change “AV Output (Scart)“ to “Video“ or “RGB“.
How to fix piercing noise coming from the speakers of Panasonic DVD-RV32 DVD Player?
To resolve piercing noise coming from the speakers when using your Panasonic DVD Player, ensure you have selected the correct setting for “Dolby Digital“, “DTS Digital Surround“ and “MPEG Audio“ in the SETUP screen’s AUDIO menu.
What to do if Panasonic DVD-RV32 DVD Player displays 'NO PLAY'?
If your Panasonic DVD Player displays “NO PLAY“, it means a disc was inserted that the unit cannot play. Insert a disc that it can play.
What to do if Panasonic DVD Player is not responding when buttons are pressed?
If your Panasonic DVD Player is not responding when buttons are pressed, it may be because some operations are prohibited by the disc, or the unit may not be operating properly due to lightning or static electricity. Press [?????/I] to switch the unit to standby mode, disconnect the AC mains lead, then reconnect it.
What to do if 'H' appears on the display of Panasonic DVD Player?
If “H “ appears on the display of your Panasonic DVD Player, trouble is likely to have occurred. Press [?????/I] to switch the unit to standby mode and then back to ON, disconnect the AC mains lead, and then reconnect it.
Why can't I select alternative languages on my Panasonic DVD-RV32 DVD Player?
An alternative language cannot be selected on your Panasonic DVD Player if the disc does not contain more than one language. With some discs, the alternative language must be selected in a disc menu.
Warns about laser exposure, handling, and precautions for laser products.
Advises against exposure to rain, moisture, and placing objects on the unit.
Covers power source type, plug polarization, cord protection, and overloading.
Details ventilation, foreign material avoidance, magnetism, stacking, and surface placement.
Lists playable/unplayable discs and precautions for handling discs.
Explains direct connection to TV and S-Video/Component Video outputs.
Guides through setting language, confirmation, and TV aspect ratio.
Step-by-step guide to playing discs, pausing, and stopping.
Instructions for playing MP3/WMA files, including folder/file naming.
How to resume playback from where you left off and memorize positions.
How to program a sequence of tracks or chapters to play.
Setting the unit to repeat a track, title, disc, or group.
Adjusting Advanced Surround and Bass Plus for enhanced audio.
Configuring audio language, subtitle, menus, and parental ratings.
Adjusting TV aspect, still mode, black level, and NTSC output.
Configuring PCM conversion, Dolby Digital, DTS, and MPEG outputs.
How to set and manage a password for DVD playback ratings.
Configuring digital audio output for compatible equipment.
Connecting for 5.1-channel surround sound via digital interfaces.
Resolving no power issues and automatic standby mode problems.
Troubleshooting unresponsive buttons or remote control problems.
Outlines warranty coverage for parts, labor, and batteries.
General| Type | DVD Player |
|---|---|
| Audio Formats Supported | Dolby Digital, DTS |
| Width | 16.9 inches |
| Height | 3.1 inches |
| Progressive Scan | Yes |
| Remote Control | Yes |
| Output Connections | Composite Video, S-Video, Component Video, Digital Audio Out (Coaxial) |
| Disc Compatibility | CD, CD-R, CD-RW, DVD, DVD-R |
| Power Consumption | 15W |
| Video Formats Supported | MPEG-2 |
To Next Page