k:J (MP3 discs)
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders are treated as groups.
1 Press [TOP MENU] or [MENU].
A file list appears.
Group name
I
2 Press [A,71 to select the track and press
[ENTER].
Play starts and continues to the last track in the last group.
“m” indicates the track currently playing.
To show other pages
Press [A, v, 4, .] to select “Prev” or “Next” and press [ENTER].
After listing all the tracks in one group, the list for the next group appears.
To close the file list screen
Press [TOP MENU] or [MENU]
Using the tree screen to find a group
1 Press [b] while a track is highlighted to display
the tree screen.
You cannot select groups that do&in no compatible files.
Press [A, V] to select a group and press [ENTER].
To clear the position before play
2
Press [ml.
The file list for the group appears.
For your reference
*You can memorize positions on up to five different discs at a time. When
you memorize another position, the earliest position is replaced.
*Press [4, ,] to jump layers in the tree screen.
ml
*Discs must conform to IS09660 level 1 or 2 (except for extended for-
mats). MP3 files must have the extension “.MP3” or “.mp3”.
*This unit IS compatible with multi-session but if there are a lot of sessions
It takes more time for play to start. Keep the number of sessions to a min-
imum to avoid this.
Chapter Preview m
One of these messages appears immediately after you press [b] (PLAY).
l Thrs unit is not compatible with ID3 tags.
*This unit is not compatible with files with a sampling rate of 32 kHz.
*When creating a WMA disc, ensure the copyright feature is off.
l WMA flies must have the extension “.WMA” or;.wma”.
*This unit can play WMA flies with a compression rate of 48 kbps or more.
*Noise may occur when playing WMA files.
*There are some files this unit cannot play (e.g., copyright protected).
“TRACK PROTECTED” or “CANNOT PLAY THIS TRACK” appear on the
unit’s display to Indicate such tracks.
Press [,I (PLAY) while the message is displayed and the beginning por-
tions of each chapter up to the current one are played. Full play resumes
from the point where you pressed [m] or [POSITION MEMORY].
(This feature works only within a title.)
If you do not press [b] (PLAY), the message disappears and play starts
from where you pressed [m] or [POSITION MEMORY].
Microsoft, Windows Media, and the Windows
Logo are trademarks or registered trademarks of
Microsoft Corporation in both the Unlted States
and other countries.
Naming folders and files
At the time of recording, prefix folder and
file names with 3-digit numbers in the
order you want to play them (this may
not work at times).
Example: MP3
root
(When the elapsed play time is displayed)
The position you stopped play at is recorded by the unit when “D” is flash-
mg on the display. _
c
While “D” is flashing, press [b] (PLAY) to start play from where you
stopped it. (When playing DVD * Chapter Preview below)
*The position is cleared when the disc tray is opened or the unit is
switched to standby.
*Press [m] to clear the position.
Position Memory function
This function allows you to memorize a position to start from even after
switching the unit to standby or changing discs.
During play, press [POSITION
MEMORY].
Press [POWER 01 to switch the
unit to standby, or press [A] to
remove the disc.
When you are ready to play the disc again, press [,I (PLAY).
Play starts from the memorized positlon and the position is cleared.
(When playing DVD 0 Chapter Preview below)
To Next Page
Loading...
