Panasonic DVD-RV32

A, v, 4, .I
ENTER
CANCEL
SETUP
RETURN
Remote control only
See page 16 for menu and optron details.
1 Press [SETUP] to show the menus.
*The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (* page 7).
2 Press [4, ,] to select the menu’s tab.
The screen changes to drsplay the menu
DISC
Video
Audio
i
Others
i
Display
3 Press [A, V] to select the item you want to
change and press [ENTER].
J
4 Press [A, V] to select the option and press
[ENTER].
The screen now shows the menu again.
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
*If you enter a wrong number, press [CANCEL] to erase it before you
press [ENTER].
*The lock symbol appears closed to show the rating is locked.
*Do not forget your password.
2. Press [ENTER] to confirm the 4 digits.
Now, when you Insert a DVD that exceeds the ratings limit you set,
a message appears on the televtsion.
Follow the on-screen instructions.
Change the settings when you have connected equipment through this
unrt’s DIGITAL AUDIO OUT terminal (OPTICAL).
PCM Down Conversion
E
Select how to output the high-quality 96.kHz audio signals on discs that do
.g
not have copyright protection.
!!
No (Factory preset): B
Output as 96 kHz. The equipment you connect must be compatible with
these signals.
$
g
Yes:
E
Down-sampled to 48 kHzil6 bit.
9
Dolby Digital, DTS Digital Surround and MPEG;
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for MPEG ):
Select if the equipment you connected cannot decode the signal.
Only for the Middle East, South Africa, Australia and N.Z.
Off (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal
IMPORTANT
If the equipment you connected cannot decode the signal, the set-
ting must be changed to PCM or Off. If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP]