Use the m
q q q
buttons to control the following features, used to
enhance your enjoyment of movies. ONE TOUCH CINEMA MEMORY
then allows you to store the settings and recall them at a touch of a button.
llm
Turn Advanced Surround and BASS PLUS off when using Dolby Pro
Logic. Dolby Pro Logic will not work correctly if they are on.
(Dolby Digital, P-channel or over only)
Use ADVANCED SURROUND V.S.S. (Virtual Surround Sound) to enjoy a
surround-like effect if you are using 2 front speakers.
If you are playing a disc with surround effects recorded on it, the effect IS
broadened and sound seems to come from vrrtual speakers on either side.
During play
Press [
q
A.SRD].
Each time you press the button:
1: Natural effect
I
2: Emphasized effect
I
L OFF: Cancel (Factory preset)
Optimum seating position
Speaker
Speaker
<When using the
television’s speakers>
3 to 4 times distance A
Distance A=
Televisron’s width
Seating position
aAdvanced Surround will not work, or wih have less effect with some
discs.
*Turn off the surround sound effects on the equipment you have con-
nected when using this effect.
*Turn Advanced Surround off if it causes distortion.
m m
Turn BASS PLUS on when you have connected an active subwoofer to the
SUBWOOFER terminal on the rear of the unit (0 page 18).
Press [
q
BASS].
Each time you press the button:
.
OFF
I
1: Natural bass effect (Factory preset)
L
i 2: Emphasrzed bass effect
You can change the picture quality for movie viewing.
Press [
q
CINEMA].
Each time you press the button:
.
Cin.1: Mellows images and enhances
I
detail in dark scenes.
Cin.2: Sharpens images and enhances
I
detail in dark scenes.
i Nor.: Normal mode (Factory preset)
For your reference
You can make finer adjustments to the picture if desired (- page 15, Digi-
tal picture mode-User mode).
m (Dolby Digital, O-channel or over, where the dialogue is
recorded in the center channel)
This mode makes the dialogue in movies easier to hear.
Press [
q
D.ENH].
Each time you press the button:
ON +--+ OFF (Factory preset)
Dralogue Enhancer will not work or will have less effect with some discs
This feature allows you to reselect the settings you made for ADVANCED
SURROUND, BASS PLUS, CINEMA and DIALOGUE ENHANCER with
one button press.
Putting the settings into memory
After making the settings
Press and hold [ONE TOUCH MEMORY].
The button on the main unit lights.
The settings remain in the memory even if you turn the unit off
Recallingthengsl
Press [ONE TOUCH MEMORY].
The button on the main unit lights.
To cancel
Press [ONE TOUCH MEMORY] to turn it off and return the settings for the
features to the factory preset.
l
m ADVANCED SURROUND:
OFF
.m BASS PLUS:
1
l
I CINEMA: Nor.
l
a DIALOGUE ENHANCER:
OFF
The button’s light also turns off if you press any of the other buttons to
change the settings.
To Next Page
Loading...
