Panasonic DVD-RV60

Other manuals for Panasonic DVD-RV60

Questions and Answers:

M
Mary DudleyAug 16, 2025
How to fix no sound on Panasonic DVD-RV60 DVD Player?
- C
  Curtis IbarraAug 16, 2025
  If there is no sound, first check the connections. If connected to an amplifier, adjust the speaker settings in the initial settings menu, selecting 'Yes' for connected speakers. For amplifiers with built-in decoders connected via digital audio output, set 'Digital Audio Output' to 'Bitstream' for Dolby Digital or DTS Digital Surround. Also, turn V.S.S. off if sound only comes from the front speakers.
J
janicemurphyAug 19, 2025
What to do if my Panasonic DVD Player has no power?
- B
  brian36Sep 12, 2025
  If your Panasonic DVD player has no power and is in standby mode, ensure the AC mains lead is securely inserted into the household mains socket. Also, turn the power back ON. Note that the player automatically switches to standby mode after approximately 30 minutes in stop mode to conserve power.
L
Latoya JonesAug 22, 2025
Why is there no picture on my Panasonic DVD-RV60?
- M
  Michael Dodson MDAug 22, 2025
  If there is no picture on your Panasonic DVD Player, ensure that all equipment is properly connected and that the television’s video input setting (e.g. AV1, AV2) is correct. You may also need to adjust the TV Aspect setting in the initial settings menu or change the screen mode on the television itself.
D
ddonovanAug 25, 2025
What to do if my Panasonic DVD-RV60 DVD Player remote control is not working?
- T
  Traci ReevesAug 25, 2025
  If the key operation is not effective on your Panasonic DVD player (either on the player or via remote control), check that the batteries are correctly installed with the correct polarities. If the batteries are depleted, replace them. Ensure you are pointing the remote control at the remote control sensor and are within 7 meters, and that there are no obstacles blocking the path between the remote and the sensor.
J
Jon GonzalezAug 27, 2025
Why won't my Panasonic DVD-RV60 DVD Player start playing?
- Z
  Zachary LaneAug 28, 2025
  If your Panasonic DVD player fails to start even when the play button is pressed, condensation may have formed; wait 1 to 2 hours for it to evaporate. Alternatively, try switching the player to standby mode and then back on. If the issue persists, disconnect the AC mains lead and then reconnect it. The player may also not be operating correctly due to lightning, static electricity or some other external factor. In this case, press the power button to switch the player to standby mode and then back to on.
C
Charles MartinezAug 31, 2025
Why is the language wrong on my Panasonic DVD-RV60 DVD Player's menus?
- E
  Elizabeth SingletonAug 31, 2025
  If the language for the player’s menus and on-screen messages is wrong, go to the initial settings menu “3 Menu Language” and change the language.
G
George BurnsSep 3, 2025
What does "CHECK THE DISC" mean on my Panasonic DVD Player?
- V
  Victoria FosterSep 3, 2025
  If the self-diagnosis display function message "CHECK THE DISC" is shown, it indicates that the disc is dirty. Wipe the disc clean.
R
Richard YuSep 6, 2025
Why won't my Panasonic DVD-RV60 DVD Player play this disc?
- K
  Kevin ConradSep 6, 2025
  Your Panasonic DVD player may not play the disc because it is not a DVD, Video CD, or CD. Also, DVDs with a region number other than “2” or “ALL” cannot be played. DVDs with multiple region numbers including “2” can be played.
J
Jamie GarrettSep 9, 2025
How to fix no on-screen display on Panasonic DVD-RV60?
- J
  Jessica GarciaSep 9, 2025
  If there is no on-screen display, ensure that the “Off” setting is not selected for “1 On-Screen Messages” in “4 On-Screen Messages”; select “On”. You can also change the position of the GUI screens using “2 Colour and Position” in “4 On-Screen Messages” of the initial settings.
C
Chris PopeSep 12, 2025
Why is the picture distorted during rapid advance on my Panasonic DVD player?
- P
  Patricia AcostaSep 12, 2025
  Picture distortion during rapid advance or rapid reverse is normal.

Panasonic DVD-RV60 Specifications

Operating Environment

operating temperature range	5 to 35 °C
operating humidity range	5–90 % RH
power consumption in standby mode	approx. 4.0 W

Power

power requirements	AC 220–240 V, 50 Hz
power consumption	18 W

Video Output

video output level	1 Vp-p (75 ≠)
s video Y output level	1 Vp-p (75 ≠)
s video C output level NTSC	0.286 Vp-p (75 ≠)
s video C output level PAL	0.300 Vp-p (75 ≠)
RGB video R output level	0.7 Vp-p (75 ≠)
RGB video G output level	0.7 Vp-p (75 ≠)
RGB video B output level	0.7 Vp-p (75 ≠)

Audio Output

audio output level	2 Vrms (1 kHz, 0 dB)
frequency response DVD linear audio	4 Hz–22 kHz (48 kHz sampling)
frequency response CD audio	4 Hz–20 kHz (EIAJ)
S/N ratio CD audio	115 dB (EIAJ)
dynamic range DVD linear audio	103 dB
dynamic range CD audio	99 dB (EIAJ)
total harmonic distortion CD audio	0.002 % (EIAJ)