Getting Started
VQT8626
6
Disc information
For the purpose of these operating instructions, “DVD” stands for DVD-Video and “CD” stands for Audio CD.
Discs not supported by this
player
³Do not try to play Photo CD or CD-R.
(Data on the disc may be damaged.)
³DVD with region number other than “2” or “ALL”
³CD-G ³Divx Video Disc
³DVD-ROM ³CD-RW ³DVD-Audio
³DVD-R ³DVD-RAM ³DVDiRW
³DVD-RW ³SVCD ³CD-ROM
³CVD ³SACD ³VSD
³CDV
etc.
Discs supported by this player
8 cm disc/
12 cm disc
8 cm disc/
12 cm disc
8 cm disc/
12 cm disc
DVD-Video
Video CD
Audio CD
º Region number supported by this player
Region numbers are allocated to DVD players and software accord-
ing to where they are sold.
³The region number of this player is “2”.
³The player will play DVDs marked with labels containing “2” or
“ALL”.
Example:
º Playing DVDs and Video CDs
The producer of the material can control how these discs are played.
This means that you may not be able to control play of a disc with
some operations described in these operating instructions. Read the
disc’s instructions carefully.
Example: ³“/” appears when you press the skip buttons to move
to the next section.
³Resume, repeat play, and markers may not work during
play of interactive DVDs and menu play of Video CDs
with playback control.
³After showing the Karaoke menu, tracks are played
successively without returning to the menu (Video CD
with playback control).
º “Copy Protection”
Some DVD discs contain a “Copy Protection” signal which can affect
the video signal if the output of the player is fed through a VCR to the
TV. The picture may become unstable or the picture contrast may
change drastically. It is therefore very important to connect this DVD/
VIDEO CD/CD player according to the diagram in these Operating
Instructions.
º Marks used in these operating instructions
[DVD]
: indicates features applicable to DVD only.
[VCD]: Video CD only.
[CD]: CD only.
º Compatible with PAL DVD/Video CD and NTSC
DVD/Video CD
This player can play discs recorded in either PAL or NTSC format.
However, the player must be connected to a Multi-system television
or PAL television which is capable of receiving PAL 525/60 system to
play both PAL DVD/Video CD and NTSC DVD/Video CD.
The use of a Multi-system television is recommended.
º Type of disc for the type of television
DVD and Video CDs are recorded using either PAL or NTSC. Refer
to this table to select discs suitable for your television.
4 Clear images are shown on the
screen.
k No clear images shown on the
screen.
¤1 If you select “2 NTSC” in “7 NTSC Disc Output” in “9 Other
Settings”, the picture may be clearer (ápage 31).
¤2 In “9 Other settings” – “7 NTSC Disc Output”, select “1 PAL 60”
(ápage 31).
Note
³The bottom part of the picture may be cut off if the Video CD played
does not comply with standards.
Disc
PAL
NTSC
PAL
NTSC
PAL
NTSC
TV Monitor
4
4
¤1
k
k
4
4
¤2
TV type
Multi-system TV
NTSC
PAL
2
ALL
2
4
1
etc.
Example:
To Next Page
Loading...
