Panasonic DVD-RV60

27
VQT8626
Advanced Operations
H
STOP
PAUSE PLAY
SKIP
TOP MENU MENU
DISPLAY
PLAY MODE SUBTITLE AUDIO ANGLE
ENTER
RETURN
1 2 3
A-B REPEAT
4 5 6
7 8 9
SETUP CANCEL
0 S 10
6: 9 5
∫ ; 1
SLOW / SEARCH
<
REPEAT MODE
OPEN/CLOSE
V.S.S.
2
1
RETURN
1
2·3
1 Disc Languages
Level 8
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
8 Speaker Setting
Press RETURN to exit
9 Other Settings
English
Bright
4:3
2-channel
SETUP
ENTER
3
ENTER
Changing initial settings
Change the initial settings to suit your preference and to suit the play-
er to the environment in which it is being used.
Common procedures
1 Press [SETUP] in the stop mode.
The initial settings screen is displayed.
2 Press the cursor buttons [3, 4] to se-
lect the item and press [ENTER].
Each item that can be modified is displayed.
1 Disc Languages (➡ page 28)
Change the soundtrack language, subtitle language and
the language used in the disc’s menu to be used for every
disc played back.
2 Ratings (➡ page 29)
Change the ratings level to prevent play of discs, skip vio-
lent scenes, or replace scenes with others by entering a
password. This is also called a parental lock.
3 Menu Language (➡ page 30)
Change the language used for the on-screen displays and
initial settings menus.
4 On-Screen Messages (➡ page 30)
Choose whether “Play”, “Still” and other displays will be
displayed or not, and the colour and position of these dis-
plays as well as GUI screens.
5 FL Display (➡ page 30)
Change the brightness for the FL display.
6 TV Aspect (➡ page 11)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output (➡ page 37)
Change the settings to suit the type of digital equipment
you have connected.
8 Speaker Setting (➡ page 39)
Change the settings to suit the speakers you have con-
nected.
9 Other Settings (➡ page 31)
Choose the kind of picture shown when play is paused,
and various other settings to enhance your viewing experi-
ence.
3 Press the cursor buttons [3, 4] to se-
lect the setting and press [ENTER].
≥Some items require additional steps. (See the respective
page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [SETUP] or [RETURN].
For your reference
≥The numeric buttons can also be used instead of the cursor buttons
[3, 4] for selecting items or settings. Pressing [ENTER] is not
necessary.
Numeric
buttons