34
VQT8626
Home Theater
Home theatre
ª
A
Connecting an amplifier with 5.1-channel audio input terminals
This unit has a built-in Dolby Digital/DTS Digital Surround decoder so you can enjoy surround sound encoded with these systems without having to
connect this unit to an amplifier with a decoder. The amplifier must have 5.1-channel discrete input terminals.
Home theater
When you have finished connection
≥In “8 Speaker Setting”, select “1 Multi-channel” and make changes to suit your speakers (➡ page 39).
Speaker presence: Select “Yes” if the corresponding speaker is connected.
Select “No” if the corresponding speaker is not connected.
Center and surround speaker delay time (Dolby Digital DVD only) : Adjust if you cannot place your speakers in the optimum position.
Channel balance: Adjust the output level of the speakers to make up for differences in volume caused by different types of speaker or
distance.
≥Go to “7 Digital Audio Output” and set “1 PCM Down Conversion” to “No” (➡ page 37).
Note
≥Turn off V.S.S. (➡ page 23) if you have connected a subwoofer, center speaker, or surround speakers as well as the front speakers. Sound will not
come from the other speakers if V.S.S. is on.
≥When playing DVDs recorded in MPEG 2 audio, multi-channel audio will be output as well as Dolby Digital or DTS Digital Surround.
≥Additional equipment and cables are not supplied.
Amplifier with 5.1-channel audio input terminals
≥Read the instructions for the amplifier and speakers for connection
details.
Speakers
(You can connect from 3 to 5 speakers including the front two.)
≥Front speakers (L/R)
≥Center speaker
≥Surround speakers (L/R)
≥Subwoofer
Back of the player
Audio cable
≥Connect cables to terminals corresponding to the speakers you
have connected.
OPTICAL COAXIAL
SURROUND
SURROUNDCENTER
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
SUB–
WOOFER
AC IN
R
R
/
FRONT R
L
/
FRONT L
AUDIO OUT
VIDEO OUT
S VIDEO OUT
AV1
AV2
L
L
R
CENTER
SUB-
WOOFER
SURROUND
(L)
(R)
(L)
(R)
FRONT
To Next Page
Loading...
