5
Getting Started
VQT8626
SCART and S video terminal information
³You can select “Video”, “S-Video” or “RGB” at the “6 AV1 Output” of the initial settings “9 Other Settings”. (á page 31.)
³RGB stands for: Red, Green and Blue colour signals. These are output as separate signals.
Pin NO AV1 (Video)/ AV1 (S video) AV1 (RGB, Standby)/
AV2 (Playback) AV2 (Standby)
1 Audio Output (R) Audio Output (R) Audio Output (R)
2 Audio Input (R) Audio Input (R) Audio Input (R)
3 Audio Output (L) Audio Output (L) Audio Output (L)
4 Audio GND Audio GND Audio GND
5 No Connection No Connection Blue GND
6 Audio Input (L) Audio Input (L) Audio Input (L)
7 No Connection No Connection Blue
8 Switching Voltage Switching Voltage Switching Voltage
9 No Connection No Connection Green GND
10 Through AV1 to AV2 Through AV1 to AV2 Through AV1 to AV2
11 No Connection No Connection Green
12 No Connection No Connection No Connection
13 No Connection S video (C) Output GND Red GND
14 Blanking GND Blanking GND Blanking GND
15 No Connection S video (C) Output Red
16 Blanking Blanking Blanking
17 Video Output GND S video (Y) Output GND Video Output GND
18 Video Input GND Video Input GND Video Input GND
19 Video Output S video (Y) Output Video Output
20 Video Input Video Input Video Input
21 GND GND GND
21-pin SCART terminal
Luminance in
Luminance earthChrominance earth
Chrominance in
S video 4-pin terminal
OPTICAL COAXIAL
SURROUND
SURROUNDCENTER
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
SUB–
WOOFER
AC IN
R
R
/
FRONT R
L
/
FRONT L
AUDIO OUT
VIDEO OUT
S VIDEO OUT
AV1
AV2
L
L
R
19 1721 15 13 11
97531
20 18 16 14 12 10
8642
To Next Page
Loading...
