40
VQT8626
Home Theater
A
B
C
LS
LS
LS
RS
L
R
SW
D
S
D
F
D
C
C
Press RETURN to exit
Speaker Setting
Exit
Test
0
dB
0
dB
0
dB
0
dB
0
ms
0
ms
LS RS
C
SW
LR
Press RETURN to exit
Speaker Setting
Exit
Test
0
dB
0
dB
0
dB
0
dB
0
ms
0
ms
LS RS
C
SW
LR
Press RETURN to exit
Speaker Setting
Exit
Test
0
dB
0
dB
0
dB
0
dB
0
ms
0
ms
LS RS
C
SW
LR
Home theater
Setting the size and presence of your
ª
A
speakers
1. Press the cursor buttons [3, 4, 2, 1] to select the item and
press [ENTER].
2. Press the cursor buttons [3, 4] to select the setting and
press [ENTER].
≥Large speaker icon
If the speaker supports low-frequency (under 100 Hz) reproduction
≥Small speaker icon
If the speaker does not support low-frequency reproduction.
≥If you do not connect a subwoofer, it is preferable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
ª
B
Delay time
[DVD] (Dolby Digital only)
1. Press the cursor buttons [3, 4, 2, 1] to select the item and
press [ENTER].
2. Press the cursor buttons [3, 4] to adjust the delay time and
press [ENTER].
≥≥
≥≥
≥Center speaker
Set delay time to “0 ms” (factory preset) if D
F is less than or
equal to D
C.
≥≥
≥≥
≥Surround speaker
Set delay time to “0 ms” (factory preset) if D
F and DS are equal.
ª
C
Channel balance
1. Press the cursor buttons [3, 4, 2, 1] to select “Test” and
press [ENTER].
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
FRONT(L) =
=)
CENTER =
=)
FRONT(R)
v
SURROUND(L) (======== SURROUND(R)
2. While listening to the test signal, press the cursor buttons
[3, 4] to adjust the volume of the center and surround
speakers so they are the same apparent volume as the front
speakers. (The front speakers cannot be adjusted here.)
3. Press [ENTER]. (The test signals are stopped.)
Note
≥A test signal is not output from the subwoofer. To adjust its volume,
play something, then return to this screen to adjust to your taste.
Large/Yes Small/YesNo
Center delay time
(
0 ms)
Surround delay time
(
0 ms)
Center
channel balance (0 dB)
Surround (R)
channel balance (
0 dB)
Surround (L)
channel balance (0 dB)
Subwoofer
channel
balance
(
0 dB)
Test
signal
Ideal center speaker position
Ideal surround
speaker position
Place all your speakers within this circumference
In case of surround speaker (L)
Center
Large/Small/No
Exit
Surround (R)
Large/Small/No
Front (L)
Large/Small
Subwoofer
Yes/No
Front (R)
Large/Small
Surround (L)
Large/Small/No
≥Underlined items are factory preset.
≥Underlined items are factory preset.
≥Underlined items are factory preset.
If DFjDS=
approx. 200 cm
approx. 400 cm
approx. 600 cm
then set to
5.3 ms
10.6 ms
15.9 ms
If DFjDC=
approx. 50 cm
approx. 100 cm
approx. 150 cm
approx. 200 cm
then set to
1.3 ms
2.6 ms
3.9 ms
5.3 ms
v
To Next Page
Loading...
