Panasonic DVD-RV32

A, v, 4, .I
ENTER
\.
Numbered
buttons
(When the elapsed play time is di~~lsy~)
During play
Press [REPEAT].
For example: DVD
Each time you press the button:
*
-b
m
Chapter (C)-Title (T) -OFF
4 I
T
I
~vcol
Track (T)-Entire disc (A)-OFF
f
I
(MP3 discs)
Track (T)-Group (G) -OFF
t
I
“All (A)” during program and random play.
If the Video CD has playback control
1. Press [W] during play until “PBC PLAY” is cleared from the display.
2. Press the numbered buttons to select a track to start play (* page 10).
3. Press [REPEAT] (0 above).
rim
You cannot use repeat play to repeat an entire DVD or an entire MP3 drsc.
W To repeat only your favorite tracks/chapters
Start program play (see right) and press [REPEAT] to display “A”.
You can repeat a section between points A and B within a title or track.
During play
1 Press [A-B REPEAT] at the starting point (A).
2 Press [A-B REPEAT] at the finishing point (B).
e.
To cancel
Press [A-B REPEAT] untrl “0~ ” IS displayed
m
*Some subtitles recorded around point A or B may fail to appear. m
*The unit automatically determrnes the end of a title/track as point B when
the end of the title/track is reached.
*A-B repeat is canceled when you press [QUICK REPLAY]
Remote control only
You can select up to 32 tracks to play in the order you choose
While stopped
1 Press [PROGRAM].
e.g. CD
I
Track No.
Program No.
2 ~DVD, MP3 discs only1 Press the numbered buttons to
select a title (DVD) or group (MP3 discs).
*Some items cannot be selected.
8
*Different trtles have different soundtrack and subtitles.
g
3 Press the numbered buttons to select a track (CD
$
or VCD) or chapter (DVD) (and, for MP3 discs
8
press [ENTER]).
‘D
*Repeat steps 2 and 3 to program other items.
8
*To select an item using the cursor buttons
I
Press [ENTER] and [A, v] to select an item, then press [ENTER]
again to register the number.
9
All the items on a disc, a title or a group are selected when you
select “ALL’.
*Times are not displayed when programming DVD and MP3.
4 Press [,I (PLAY).
Play now begins in the programmed sequence.
*Some items cannot be played even if you programmed them. m
To add or change items
Press [A, v] to select an available item, then repeat steps 2 and 3.
To move to the page before or after the one shown
Press [44] or [,,I.
To clear the programmed items one by one
Press [A, v] to select the item number (No) and press [CANCEL]. (Alter-
natively, you can select “Clear” with [A, v, 4, .] and press [ENTER].)
To clear the whole program
Move to “Clear all” with [A, v, 4, .] and press [ENTER]. The whole pro-
gram is also cleared when the unit is turned off or the disc tray is opened.
To exit the program mode
Press [PROGRAM] while stopped. (The program is retained in memory.)
While stopped
1 Press CRANDOMI.
e.g. CD
2 Press the numbered buttons to select a title (DVD
only) and press [,I (PLAY).
aSome titles cannot be selected. m
Play now begins in random order.
8
G!
To exit the random mode
Press [RANDOM] while stopped.