This unit can decode Dolby Digital. Connect an amplifier with 5.1-channel discrete input terminals to enjoy surround sound.
-1--1 1 I I 1
© @ @ 0 © 0
CENTER SUB- SURROUND FRONT
WOOFER (L) (R) (L) (R)
I
I
I
, (
AC _N_ 1
L J
Back of the unit
Audio cable
eConnect cables to terminals corresponding to the speakers you
have connected.
Amplifier with 5,1-channel audio input terminals
eRead the instructions for the amplifier and speakers for
connection details.
Speakers
(You can connect from 3 to 5 speakers including the front two,)
eFront speakers (L/R)
eCenter speaker
eSurround speakers (L!R)
eSubwcofer
When you have finished connection
oln "8 Speaker Setting", select "1 Multi-channel" and make changes to suit your speakers (.,,,page 38).
Speaker presence: Select "Yes" if the corresponding speaker is connected.
Select "No" if the corresponding speaker is not connected.
Center and surround speaker delay time: Adjust if you cannot place your speakers in the optimum position.
Channel balance: Adjust the output lever of the speakers to make up for differences in volume caused by different types of speaker or distance.
oGo to "7 Digital Audio Output" and set "t PCM Down Conversion" to "No" (=, page 36).
oTum off V.S.S. (w page 22) if you have connected a subwoofer, center speaker, or surround speakers as well as the front speakers. Sound will not
come from the other speakers if V.S.S. is on.
oUse the connection described in r_l on page 34 to enjoy DVDs encoded with DTS.
To Next Page
Loading...
