Press to exit.
Remote control sensor
Skip
Press [u i] to skip titles, chapters, tracks, etc.
Can also skip to the markers.
•
•
Stop
The position is memorized when “RESUME STOP” is
displayed on your television screen.
Press [q] (PLAY) to resume. (Resume play)
Press [g] to clear the position.
•
•
Search
(during play)
Slow-motion
(during pause)
Up to 5 steps
Press [q] (PLAY) to restart play.
Slow-motion: Forward direction only
Slow-motion: Does not work.
•
•
•
Pause
Press [q] (PLAY) to restart play.•
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [g]
when you finish to preserve the unit’s motor and your television screen.
To play
or contents on DVD-RAM, set “DVD-VR/DATA” to “DATA”
( page 19, “OTHERS” menu).
Total title number may not be displayed properly on
4R/4RW.
•
•
•
If you are experiencing problems, refer to “Troubleshooting guide” (
page 21 to 23).
Basic play
VCD
DivXMPEG4
Standby/on switch (8)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
Standby/on indicator (
^
)
When the unit is connected to the AC mains supply, this indicator lights up in standby
mode and goes out when the unit is turned on.
Basic play
9
FOR THE UNITED KINGDOM AND REPUBLIC OF IRELAND ONLY
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
Power ON.
Load the disc.
Load double-sided discs so the
label for the side you want to play is
facing up.
•
Open the disc tray.
Start play.
Stop
Note
MP3
JPEG
DVD-VR
The United Kingdom and Republic of Ireland
To Next Page
Loading...
