DISASSEMBLY / REASSEMBLY INSTRUCTIONS
Issue 1 Section 4 MCUK000601C8
Revision 0 – 24 – Service Manual
3. Unclip the speaker holder and lift out the speaker.
Figure 4.15: Speaker Removal
4. Remove the RF Shield by depressing one of the side retaining clips with a small screwdriver blade or similar blunt object.
Figure 4.16: Removal of RF Shield
5. Once the RF Shield has been removed, the Memo button (GD92 / GD92C) and Desktop Handsfree (DTHF) speaker may
be lifted out from the case.
6. The Vibrate motor may be removed by gently applying pressure under the spindle / counterweight.
Figure 4.17: Removal of Vibrate Motor
7. Using a small screwdriver blade or similar blunt object, depress the lug on the antenna base in order to release the entire
antenna unit.
10229-1
10227-1
10212-1
To Next Page
Loading...
