TEST AND MEASUREMENT
Issue 1 Section 6 MCUK000601C8
Revision 0 – 34 – Service Manual
Figure 6.3: PCB Repair Jig
RF Adaptor
This unit provides an RF connection between the Unit Under Test and external test equipment. Use part number JT00044 for
GD52 and JT00040 for GD92 / GD92C.
Figure 6.4: GD92 / GD92C RF Adaptor
GSM Tester
This unit acts as a base station providing all the necessary GSM signalling requirements and also provides GSM signal
measuring facilities.
Interface Cable (Part No. JT00043)
The interface cable allows connection between a computer and the Unit Under Test via IFB003 or IFB004.
Figure 6.5: Interface Cable
10265-1
10232-1
10266-1
To Next Page
Loading...
