Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: - EBL128 version 2.0.x, Daily user's manual
5
3 Log on to the Control Unit (c.i.e.)
User name
Up to ten (10) User names (0, 1, 2 - - 9) might be programmed.
Default are three User names available (0, 1 and 2) but they might
have been changed and/or User names 3 – 9 might have been added
during the commissioning of the system. User name examples:
0 Information only
1 Building officer
2 Service personnel
3 Mr. Xxxxxxxxx
4 Miss Yyyyyyyyy
etc.
Password
Each User name has a Password that gives access to a user level /
type, i.e. "Information only", "Building officer" or "Service
personnel".
User levels (access level types):
Information only
Building officer
Service personnel
Access to menus according to the following pages.
How to log in
 Press the button "Access" (P8).
Log in as:
0: Information only ->
 With the keypad select 0, 1, 2 - - 8 or 9 for a User name.
(Or use "→" to scroll through the available User names.)
Press "A" to accept.
 Type the Password for that User name. (Six digits. * * * * * *)
For the default "0" (Information only) is no Password required.
After typing a correct Password, main menu H1 or H4 (depending on
the user level) will be visible.
 Press "A" to accept, scroll with "↑" and "↓" or do a quick jump
3
to
the wanted main menu. Press "A" to accept a jump to the first sub
menu, e.g. from menu H4 to U1.
3
E.g. in menu H1 press "6" for a quick jump to menu H6.