Panasonic ES-CM3A - Charging

12
English
Charging
• Before charging, make sure that this product is powered off.
• Do not charge when the socket is wet. Wipe the socket when it
is wet before charging.
• Open the protective cap to check that the charge status indicator
lights on, and then install the protective cap to avoid damaging
the system outer foil.
2
1
1
1. Insert the USB cable into the main body and the USB power
adaptor.
2. Connect the USB power adaptor to a household outlet.
3. After charging, remove the USB cable and attach the socket cover.
• Charging is completed after approx. 1 hour. The charging time
may be shortened, depending on the remaining battery level.
• Be sure to close the socket cover when using or washing.
Display of the charge status indicator during charging
Charging in progress Lights on
Charging complete Lights off
Charging abnormal Blink twice every second
When the battery capacity is low
• When this product is in use, the charge
status indicator blinks once a second.
• When this product is powered off, the main
body generates a prompt tone.
PB023037 - ES-CM3A �����_(01EN)_12-20-23.indd 12 2023/12/20 11:42:32