18
Clean the inner blades using the short brush by moving it
in the direction shown in the right figure (A).
• Do not move the short brush in the (B) direction. Doing so may
damage the inner blades and thus affect their sharpness.
• Do not use the short brush to clean the system outer foil.
)
(B)
Replacing the system outer foil and the
inner blades
• It is recommended to replace the system outer foil once a year
and the inner blades once every two years.
Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES-CM3A
System outer foil WES9087
Inner blades WES9068
Outer foil section
How to remove
Press the foil frame release buttons to
lift and remove the outer foil section.
How to install
Turn the foil frame mark (
) to the
front, and securely attach the outer
foil section onto the main body until a
“click” sound is heard.
PB023037 - ES-CM3A �����_(01EN)_12-20-23.indd 18 2023/12/20 11:42:35