Panasonic ES-EL3A - Cleaning

19
GBDFINLEDKPNSFINPLCZSKHROTR
3
3
Bring the foot care head into
contact with the skin, and
begin ling.
•Filing a single location for a long
time can cause it to become hot
with friction. To avoid this, be sure
tomakesmallchangesintheling
positionwhileling.
•Filing should be performed about
once every two weeks.
The basics of foot care
Donotusetheproductforlinganything
other than calluses and hardened skin
on the feet. (Fig. 17)
<Use on>
Callus
ף
ס
ע
A callus is a hardened
layer that forms
through repeated
pressure or abrasion.
Hardened layer
Epidermis
Derma
Things to be careful of when ling
Before use After use
ץ
ף
ע
ס
פ
Hardened layer
Epidermis
Derma
Portion to be removed
Leave some of the hardened layer
•Filing an area too deeply can cause it
tobecomesoreorinamed.
•Filing too large an area can result in
even larger calluses forming.
Therefore, be sure to leave some of the
hardened layer.
Tips for moving the foot care
head
Move in the direction indicated by the
arrows.
Useyourfreehandtosupportling.
(Fig. 18)
Cleaning
•Always clean the heads and caps after
use to keep them in a hygienic state.
•Switch off and unplug the appliance
before cleaning.
•Take care not to damage the skin
protector, the frame, the fast cap and
the gentle cap during cleaning.
Dry cleaning [
A
B
C
D
F
]
Epilation head/Shaver head
1. Lift fast/gentle caps, the frame
upward while holding the cap
release ribs [
A
B
2
]/the frame
release ribs [
D
5
] or remove the
frame by pushing the frame release
button [
F

]. (Fig. 19)
2. Clean the gentle cap [
B
], the
epilation head [
C
D
] and the
shaver head [
F
] with the cleaning
brush [
K
]. (Fig. 20)
PB015615 - EL8A-3A-2A������_(01GB)_11-07-17.indd 19 2017/11/7 11:11:22