Panasonic ES-EL7A - Page 21

21
English
Wet cleaning [ABCDEFHIJ]
Epilation head/Shaver head
1. Wet the discs and blades, and then apply liquid
hand soap.
2. Turn the switch on and then foam is created.
3. Wash the head with water to wash out hair.
• Do not use hot water.
• If soap is not completely washed away, then a white
deposit can accumulate and prevent the discs and
the blades from moving smoothly.
• Rinse the shaver head with the frame removed.
4. Turn the switch off, wipe the appliance with a dry
cloth and dry it well.
Foot care head
ES-EL9A
1. Apply liquid hand soap to the central part of the
le.
2. Pour a small amount of water on the le and turn
the switch on.
3. Rinse any debris thoroughly with water or
lukewarm water.
4. After turning the switch off, remove the frame and
rinse inside.
5. Wipe with a dry cloth and dry in a well‑ventilated
location.
Sonic scrub brush and brush head
ES-EL9A
1. Press the power switch to turn on the power, and
thoroughly rinse debris from the sonic scrub
brush.
2. Press the power switch to turn off the power,
remove the brush head, and thoroughly rinse the
underside of the brush head.
3. Wipe the appliance with a dry cloth and dry it
well.
• To protect deformation of the brush, dry it facing
upward, and then store the brush.
1
2
3
ES-EL9A USA v7.indb 21 2019/1/15 下午6:18