Panasonic ES4033-A3

1 SCHEMATIC DIAGRAM 2
2 WIRING CONNECTION DIAGRAM
2
3 DISASSEMBLY INSTRUCTIONS
3
4 CAUTION IN ASSEMBLY
6
© 2004 Matsushita Electric Works, Ltd. All rights
reserved. Unauthorized copying and distribution is a
violation of law.
ES4033-A3
ES4035-A3
5 TROUBLESHOOTING GUIDE 9
6 EXPLODED VIEW
10
7 REPLACEMENT PARTS LIST
11
AC/Rechargeable Shaver
SPECIFICATIONS
Power source
A
C 220V, 50-60Hz (Automatic voltage conversion)
Motor voltage 1.2V DC
Charging time 1 Hour for ES4035, 8 Hours for ES4033
Shaves per charge 7 times (3 minutes shave)
Measurement (H)14.6 x (W)5.7 x (D)4.9 cm
Weight 155g
Supplied accessories Soft case
Cleaning brush
CONTENTS
Page Page
ORDER NO. SD0406A47C3

Panasonic ES4033-A3 Specifications

General

Brand	Panasonic
Model	ES4033-A3
Category	Electric Shaver
Language	English

Summary

SPECIFICATIONS

1 SCHEMATIC DIAGRAM

2 WIRING CONNECTION DIAGRAM

3 DISASSEMBLY INSTRUCTIONS

4 CAUTION IN ASSEMBLY

4.1. Driving heads

Install the driving head A in motor and assemble the driving head B.

4.2. Rechargeable battery

Insert the rechargeable battery into chassis. Attach the battery o-ring and washer to the battery.

4.3. Motor and Module assembly

Put the motor and module assembly into housing A, and insert the driving heads side into housing A.

4.4. Housing

Set foil frame release buttons with springs. Put housing B on housing A. Tighten screws carefully.

4.5. Waterproof rubber

Ensure the waterproof rubber is fitted the right way around and inserted firmly into the proper position.

4.6. Driving bar

Set the trimmer driving bar into its correct position.

4.7. Side panel

Set the side panel on the body and press fit until clicking the hook at three locations.

4.8. Trimmer

Make sure bosses of handle arm insert into trimmer holes. Align housing bosses with trimmer holes.

5 TROUBLESHOOTING GUIDE

6 EXPLODED VIEW

7 REPLACEMENT PARTS LIST