EasyManua.ls Logo

Panasonic FP-E - Page 1139

Panasonic FP-E
1334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-51
WR902 FP0R
Relay No. Name Description
R9020 RUN mode flag
Turns off while the mode selector is set to PROG.
Turns on while the mode selector is set to RUN.
R9021 Not used
R9022 Not used
R9023 Not used
R9024 Not used
R9025 Not used
R9026 Message flag Turns on while the F149 (MSG) instruction is executed.
R9027 Not used
R9028 Not used
R9029 Forcing flag
Turns on during forced on/off operation for input/output relay
timer/counter contacts.
R902A
Interrupt enable
flag
Turns on while the external interrupt trigger is enabled by the ICTL
instruction.
R902B
Interrupt error
flag
Turns on when an interrupt error occurs.
R902C Sample point flag
Sampling by the instruction=0
Sampling at constant time intervals=1
R902D
Sample trace end
flag
When the sampling operation stops=1,
When the sampling operation starts=0
R902E
Sampling stop
trigger flag
When the sampling stop trigger activates=1
When the sampling stop trigger stops=0
R902F
Sampling enable
flag
When sampling starts=1
When sampling stops=0
A: Available, N/A: Not available
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com