5-129
WR910 FP-X
Address
Name Description
R9100 to
R910F
Not used -
R9110 HSC-CH0
R9111 HSC-CH1
R9112 HSC-CH2
R9113 HSC-CH3
R9114 HSC-CH4
R9115 HSC-CH5
R9116 HSC-CH6
R9117 HSC-CH7
R9118 HSC-CH8
Note1)
R9119 HSC-CH9
Note1)
R911A HSC-CHA
Note1)
R911B HSC-CHB
Note1)
- Turns on while the F166 (HC1S) and F167 (HC1R)
instructions are executed.
- Turns off when the F166 (HC1S) and F167 (HC1R)
instructions are completed.
R911C PLS-CH0
R911D PLS-CH1
R911E PLS-CH2
Note2)
R911F
Control
flag
PLS-CH3
Note2)
- Turns on while the pulses are being output by the F171
(SPDH), F172 (PLSH), F173 (PWMH) and F174 (SP0H)
instructions.
Note1) This relay is avaialble for the FP-X Ry type only.
Note2) This relay is available for the FP-X Tr type only.