EasyManua.ls Logo

Panasonic FP-E - Page 1262

Panasonic FP-E
1334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-174
FP1/FP-M/FP2/FP2SH/FP10SH/FP3
Address Name Description
R9090
Unit
No.1
Turns on when unit No. 1 is in the RUN mode.
Turns off when unit No. 1 is in the PROG. mode.
R9091
Unit
No.2
Turns on when unit No. 2 is in the RUN mode.
Turns off when unit No. 2 is in the PROG. mode.
R9092
Unit
No.3
Turns on when unit No. 3 is in the RUN mode.
Turns off when unit No. 3 is in the PROG. mode.
R9093
Unit
No.4
Turns on when unit No. 4 is in the RUN mode.
Turns off when unit No. 4 is in the PROG. mode.
R9094
Unit
No.5
Turns on when unit No. 5 is in the RUN mode.
Turns off when unit No. 5 is in the PROG. mode.
R9095
Unit
No.6
Turns on when unit No. 6 is in the RUN mode.
Turns off when unit No. 6 is in the PROG. mode.
R9096
Unit
No.7
Turns on when unit No. 7 is in the RUN mode.
Turns off when unit No. 7 is in the PROG. mode.
R9097
Unit
No.8
Turns on when unit No. 8 is in the RUN mode.
Turns off when unit No. 8 is in the PROG. mode.
R9098
Unit
No.9
Turns on when unit No. 9 is in the RUN mode.
Turns off when unit No. 9 is in the PROG. mode.
R9099
Unit
No.10
Turns on when unit No. 10 is in the RUN mode.
Turns off when unit No. 10 is in the PROG. mode.
R909A
Unit
No.11
Turns on when unit No. 11 is in the RUN mode.
Turns off when unit No. 11 is in the PROG. mode.
R909B
Unit
No.12
Turns on when unit No. 12 is in the RUN mode.
Turns off when unit No. 12 is in the PROG. mode.
R909C
Unit
No.13
Turns on when unit No. 13 is in the RUN mode.
Turns off when unit No. 13 is in the PROG. mode.
R909D
Unit
No.14
Turns on when unit No. 14 is in the RUN mode.
Turns off when unit No. 14 is in the PROG. mode.
R909E
Unit
No.15
Turns on when unit No. 15 is in the RUN mode.
Turns off when unit No. 15 is in the PROG. mode.
R909F
MEWNET-W/-P
PC link
operation mode
relay
[for PC link 1
(W/P)]
Unit
No.16
Turns on when unit No. 16 is in the RUN mode.
Turns off when unit No. 16 is in the PROG. mode.
R9100
IC memory card
installation flag
(Available PLC: FP2SH/
FP10SH)
Monitors whether the IC memory card is installed or not:
- on: IC memory card is installed.
- off: IC memory card is not installed.
R9101
(*Note)
IC memory card backup
battery flag 1
(Available PLC: FP2SH/
FP10SH)
Monitors the voltage drop condition for the IC memory card
as:
- on: Data in the IC memory card cannot be guaranteed.
- off: Data in the IC memory card can be maintained.
R9102
(*Note)
IC memory card backup
battery flag 2
(Available PLC: FP2SH/
FP10SH)
Monitors the voltage drop condition for the IC memory card
as:
- on: Battery replacement is required.
- off: Battery replacement is not required.
Note) When the system registers 46=K0, PC link 0 for the link unit with a smaller slot No. and PC link 1
for one with a larger slot No.
When the system registers 46=K1, PC link 1 for the link unit with a smaller slot No. and PC link 0
for one with a larger slot No.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com