EasyManua.ls Logo

Panasonic FP-E - Page 1263

Panasonic FP-E
1334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-175
FP1/FP-M/FP2/FP2SH/FP10SH/FP3
Address Name Description
R9103
IC memory card protect
switch flag
(Available PLC: FP2SH/
FP10SH)
Monitors the protective condition of the IC memory card as:
- on: The protect switch is not in the write-protected (WP)
position.
- off: The protect switch is in the write-protected (WP)
position.
R9104
IC memory card access
switch flag
(Available PLC: FP2SH/
FP10SH)
Monitors the condition of the IC memory card access enables
switch as:
- on (access enabled): The access enable switch is in the on
position.
– off (access disabled): The access enable switch is in the off
position.
R9105
Through
R910F
Note used -
Note) The IC memory card backup battery condition can be judged using special internal relays R9101
and R9102 as follows:
R9101 R9102 IC memory card condition
OFF OFF Not battery replacement required.
ON OFF Replace backup battery.
The data in the IC memory card is maintained.
ON ON The data in the IC memory card cannot be maintained.
Replace backup battery.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com