EasyManua.ls Logo

Panasonic FP-E - Page 1275

Panasonic FP-E
1334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-187
FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP3
FP2/
FP2SH
FP10SH
Name Descriptions
Read
-ing
Writ-
ing
MEWNET-F
(remote I/O) error
slave station
number – current
condition
(when DT9131/
DT90131 is H0,
H1, H2 or H3)
The bit corresponding to the station
number of the MEWNET-F where an
error is occurring is set to on. Monitor
using binary display.
(1: Error slave station, 0: Normal slave
station)
DT9132
DT9133
DT90132
DT90133
MEWNET-F
(remote I/O) I/O
verify error slave
station number
(when DT9131/
DT90131 is H100,
H101, H102 or
H103)
When the installed condition of a
MEWNET-F slave station set unit has
changed since the power was turned
on, the bit corresponding to that slave
station number will be set to on.
Monitor using ibnary display.
(1: Error slave station, 0: Normal slave
station)
MEWNET-F
(remote I/O) error
slave station
number – record
(when DT9131/
DT90131 is H0,
H1, H2 or H3)
The bit corresponding to the slave
station number of the MEWNET-F
where an error is occurring will be set
to on. Monitor using binary display.
(1: Error slave station, 0: Normal slave
station)
DT9134
DT9135
DT90134
DT90135
MEWNET-F
(remote I/O)
momentary
voltage drop slave
station number
(when DT9131/
DT90131 is H100,
H101, H102 or
H103)
If a momentary voltage drop at
MEWNET-F slave station set, the bit
corresponding to that slave station
number will be set to on. Monitor using
binary display.
(1: Error slave station, 0: Normal slave
station)
A N/A
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com