High−level Instructions
3 − 393
With the FPΣ
The slot numbers of target intelligent unit are allocated automatically, based on the
installation position.
Number being specified
Control unit
Expansion unit
Intelligent unit
3210
With the FP2 and FP2SH
The slot numbers of the target intelligent unit are allocated automatically, based on the
installation position.
Slot numbers are allocated in the order of the board number.
With 7−,9−, and 12−module type boards, slot numbers are specified in the same way
as with the 14−module type.
Number being specified (Hexadecimal constants)
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
16 slots (slots which can be counted as slot numbers)
14 slots (number of slots on backplane)
CPU side (14−module type backplane)
16 slots (slots which can be counted as slot numbers)
14 slots (number of slots on backplane)
Expansion side (14−module type backplane)
Power supply
Power supply
Specifying Slot Numbers
To Next Page