High−level Instructions
3 − 413
Outline Adds specified time data (hours, minutes, and seconds) to date (years,
months, and days) and clock (hours, minutes, and seconds) data.
For the FP0R/FPΣ/FP−X, the P type high−level instruction “P157
(PCADD)” is not available.
Program example
Boolean
Ladder Diagram
Address Instruction
10
F157 CADD, DT 9054, DT 10, DT 30
S1*
D
Trigger
S2
R0
(* When FP0R/FPΣ/FP−X/FP2/FP2SH/FP10SH, S1 = DT90054)
10
11
ST R 0
F157 (CADD)
DT 9054
DT 10
DT 30
S1 Starting 16-bit area for storing date/clock data (3 words are occupied in form of
BCD).
S2 Starting 16-bit area for storing time data (2 words are occupied in form of BCD).
D Starting 16-bit area for storing result (3 words are occupied in form of BCD).
Operands
Relay Timer/Counter Register
Index
register
Constant
Operand
WX WY WR WL SV EV DT LD
FL
(*
****
)
IX
(*
****
)
IY K H
Index
modifier
S1 A A A A A A A A A N/A N/A N/A N/A A
S2 A A A A A A A A A A N/A A A A
D N/A A A A A A A A A N/A N/A N/A N/A A
(*1) This cannot be used with the FP0, FP−e, FP0R, FPΣ, FP−X.
(*2) With the FP0R, FPΣ,FP−X, FP2, FP2SH, and FP10SH, this is I0 to IC.
F157
P157
(PCADD)
(CADD)
Time addition
A: Available
N/A: Not Available
To Next Page