Panasonic FP-E - Page 8

Table of Contents
vi
Special setting instructions
SYS1 Communication conditions
setting 2 − 119...............
Password setting 2 − 123......
Interrupt setting 2 − 125.......
PLC link time setting 2 − 127...
Change high−speed counter
operation mode 2 − 129.......
MEWTOCOL−COM response
control 2 − 131...............
SYS2 Change system registers
(No.40 to No.47,
No.50 to No.57) 2 − 133.......
Data compare instructions
ST= 16−bit data compare
(Start) 2 − 136................
ST<> 16−bit data compare
(Start) 2 − 136................
ST> 16−bit data compare
(Start) 2 − 136................
ST>= 16−bit data compare
(Start) 2 − 136................
ST< 16−bit data compare
(Start) 2 − 136................
ST<= 16−bit data compare
(Start) 2 − 136................
STD= 32−bit data compare
(Start) 2 − 138................
STD<> 32−bit data compare
(Start) 2 − 138................
STD> 32−bit data compare
(Start) 2 − 138................
STD>= 32−bit data compare
(Start) 2 − 138................
STD< 32−bit data compare
(Start) 2 − 138................
STD<= 32−bit data compare
(Start) 2 − 138................
STF= Floating point real number data
comparison: (Start) 2 − 140....
STF<> Floating point real number data
comparison: (Start) 2 − 140....
STF> Floating point real number data
comparison: (Start) 2 − 140....
STF>= Floating point real number data
comparison: (Start) 2 − 140....
STF< Floating point real number data
comparison: (Start) 2 − 140....
STF<= Floating point real number data
comparison: (Start) 2 − 140....
AN= 16−bit data compare
(AND) 2 − 142................
AN<> 16−bit data compare
(AND) 2 − 142................
AN> 16−bit data compare
(AND) 2 − 142................
AN>= 16−bit data compare
(AND) 2 − 142................
AN< 16−bit data compare
(AND) 2 − 142................
AN<= 16−bit data compare
(AND) 2 − 142................
AND= 32−bit data compare
(AND) 2 − 144................
AND<> 32−bit data compare
(AND) 2 − 144................
AND> 32−bit data compare
(AND) 2 − 144................
AND>= 32−bit data compare
(AND) 2 − 144................
AND< 32−bit data compare
(AND) 2 − 144................
AND<= 32−bit data compare
(AND) 2 − 144................
ANF= Floating point real number data
comparison: (AND) 2 − 146....
ANF<> Floating point real number data
comparison: (AND) 2 − 146....
ANF> Floating point real number data
comparison: (AND) 2 − 146....
ANF>= Floating point real number data
comparison: (AND) 2 − 146....
ANF< Floating point real number data
comparison: (AND) 2 − 146....
ANF<= Floating point real number data
comparison: (AND) 2 − 146....
OR= 16−bit data compare
(OR) 2 − 148.................
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com