High−level Instructions
3 − 564
Flag conditions
・Error flag (R9007):
・Error flag (R9008):
− Turns on when the area specified using the index modifier exceeds the limit.
− [S1] Turns on when the specified channel is out of the specified range.
− [S1] Turns on when the number of moving average is out of the specified
range.
− [S2] Turns on when the counting period is out of the specified range.
− [D] Turns on when the range data to be stored exceeds the area.
− Turns on when the same channel has been already controlled with the
same sorf of instruction.
− Turns on when the number of execution channels is 3 or more.
− Turns on when the high−speed counter has not been set for the specified
channel by the system register.
FP0R
To Next Page