High−level Instructions
3 − 606
Converts 32−bit data (K1234 and K56789) to decimal ASCII codes.
DT10、11 = K 1234
DT12、13 = K 56789st
”___1234__56789”
When No. of converted data is “2”, Starting position for storing is “1”, Size of the area for storing is “7”.
F251 ATOB, D−16, DT 10, DT20, DT100
R0
F250 BTOA, 32−D, DT10 , H 217 , DT 100
M
(DF)
Converts 16−bit data (H0123 and H89AB) to hexadecimal ASCII codes.
DT10 = H 123
DT11 = H 89AB
”2301AB89”
When No. of converted data is “2”, Starting position for storing is “1”, Size of the area for storing is “4”. (Normal
direction)
F251 ATOB, D−16, DT 10, DT20, DT100
R0
F250 BTOA, 16+H, DT10 , H 214 , DT 100
M
(DF)
For the reverse direction (when ”16+H” is ”16−H)
FPΣ/FP−X/FP0R
To Next Page