Panasonic FP-E - Page 920

High−level Instructions
3 − 656
Explanation of example
When specifying each value as below by the program:
Flag conditions
・Error flag (R9007): Turns on and stays on when:
・Error flag (R9008): Turns on for an instant when:
− the area specified using the index modifier exceeds the limit.
− the output time range specified by ”S3” is smaller than k1 or larger than
k30000.
FP–e
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com