EasyManua.ls Logo

Panasonic FP-E - Page 930

Panasonic FP-E
1334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
High−level Instructions
3 − 666
Description
The bias value specified by S1 or S2 is added to the input value (word data) specified by S3, and the output
value is stored in the area specified by D.
The output value is determined by the following conditions:
When the input value S3 is less than zero, the input value S3 plus the negative bias value S1 is stored in D as
the output value.
When the input value S3 equals zero, zero is stored in D as the output value.
When the input value S3 is greater than zero, the input value S3 plus the positive bias value S2 is stored in D
as the output value.
Negative bias value S1
Positive bias value S2
0
Output value D
Input value S3
Flag conditions
・Error flag (R9007): Turns on and stays on when the area specified using the index modifier
exceeds the limit.
・Error flag (R9008): Turns on for an instant when the area specified using the index modifier
exceeds the limit.
・Carry flag (R9009): Turns on for an instant when the calculated result is overflowed or
underflowed.
・= flag (R900B): Turns on for an instant when the input value S3 is recognized as “0”.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com