High−level Instructions
3 − 705
Outline This instruction calculates the exponent of a floating point real number
EXP( ).
For the FP0R/FPΣ/FP−X/FP0/FP−e, the P type high−level instruction
“P321 (PEXP)” is not available.
Program example
Boolean
Ladder Diagram
Address Instruction
S
Trigger
D
F321 EXP, DT10, DT2010
R0
10
11
ST R 0
F321 (EXP)
DT 10
DT 20
S Angle data (2 words) or lower 16-bit area of 32-bit data where angle data is
stored
D Lower 16-bit area of 32-bit data where calculated result is stored
Operands
O
WX WY WR WL SV EV DT LD FL I K H f
modifier device
S A A A A A A A A A A A A A A* A
D N/A A A A A A A A A A N/A N/A N/A A A
* Index modification of a real number is not possible.
Description
The exponent EXP(S+1 and S) is calculated from the real number data specified in S+1 and S, and the result
is stored in D+1 and D.
EXP ([S+1, S]) → [D+1, D]
The calculation is performed with the exponent base (e) equal to 2.718282.
Specifying the integer device with [S], the integer data is internally converted to real numbers before
operations continue.
F321 EXP, % DT 0, DT 4
R0
Specifying the integer device with [D], the real numbers are automatically converted into integer data.
F321 EXP, DT 0, % DT 4
R0
F321
P321
(PEXP)
(EXP)
Floating point data exponent