EasyManua.ls Logo

Panasonic FP-E - Page 970

Panasonic FP-E
1334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
High−level Instructions
3 − 706
Program example
The “f7.389056” is stored to DT20 and DT21 when the R0 turns on.
F321 EXP, K 2, DT20
R0
The “f221.406402” is stored to DT30 and DT31 when the R0 turns on.
F321 EXP, f5.4, DT30
R0
Precaution during programming
For FP0, this instruction F321 (EXP) cannot be programmed in the interrupt program.
Flag conditions
・Error flag (R9007): Turns on and stays on when:
・Error flag (R9008): Turns on for an instant when:
− The area specified using the index modifier exceeds the limit.
− If data other than real number data is specified in S+1 and S.
− If result of processing is outside integer range when integer device is
specified in D+1 and D.
・= flag (R900B): Turns on when result of processing is recognized as “0.”
・Carry flag (R9009): Turns on for an instant when the result is overflowed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com