Air volume option (CFM)
50 80 110 80 CFM
Factory setting
Pick-A-Flow Feature:
Adjustable color temperature Feature:
[For model : FV-0511VFL1 and FV-0511VFL1K]
[For model : FV-0511VFL1K only]
This product comes with Pick-A-Flow speed options.
The Pick-A-Flow switch on the face of the product allows the option to
choose 50, 80 or 110 CFM. This product can run continously or intermittently,
depending upon the needs of the owner.
This product comes with an adjustable color temperature switch.
The adjustable color temperature switch on the LED unit allows
the option to choose 3000, 4000, or 5000 K, to match the room
lighting or the owner preference.
The 3000 K LED setting produces a warm white light.
The 4000 K LED setting produces a cool white light.
The 5000 K LED setting produces a daylight color white light.
Pick-A-Flow
switch
Adjustable color
temperature switch
CFM
50 80 110
Lighting option (K)
3000 4000 5000 4000 K
Factory setting
FEATURES CONTINUED
Remove the tape
placed on the damper
and adaptor before
installation.
Flex-Z Fast™ bracket
2
The Flex-Z Fast™ bracket position can be adjusted from 16" to 24" between joists.
Install Flex-Z Fast™ bracket
WARNING
Disconnect power supply before installing
the unit.
Tape
Adaptor
Damper
Joist
Bend down
4 tabs
3
4
2 Tapping screws
(ST4.2X20)
Flex-Z Fast™ bracket
Align
Unit: inches (mm)
Please wear gloves to protect hands
during the installation.
INSTALLATION (RETROFIT)
10 7/8
(275)
1
Draw the contour with a marker through marked line
Template
PAD
Template
Drywall
Marker
10 7/8
(275)
Remove the existing fan and use housing masking
template to mark the ceiling opening and cut the
ceiling along the marked line.
2
1
Install Flex-Z Fast™ bracket to joist using 2-preinstalled
tapping screws.
3
4
Bend down 4 tabs and align bracket to the joist.
Insert the Flex-Z Fast™ bracket into the opening
and extend.
English
6
To Next Page
Loading...
