To Next PageTo Next Page
Need help?Do you have a question about the Panasonic FV-SW20VEC1 and is the answer not in the manual?
General| Manufacturer | Panasonic |
|---|---|
| Category | Controller |
| Model | FV-SW20VEC1 |
| Power Supply | AC |
| Frequency | 60Hz |
| Maximum Current | 0.5A |
| Voltage | 120V |
| Operating Temperature | 14°F ~ 104°F (-10°C ~ 40°C) |
Prepare wires for connecting the product and wall control.
Steps for physically mounting the wall control unit.
Controls product standby and running states.
Resets accumulated running time after filter maintenance.
Activates or deactivates the Boost mode.
Sets supply and exhaust air volume.
Indicates when Boost mode is active (green light).
Displays inside or outside temperature and humidity.
Sets Boost time and ASHRAE time.
Confirms air volume or time settings.
Adjusts air volume or time settings.
Indicates when the filter needs cleaning or changing.
Shows set ASHRAE and Boost operating times.
Shows the product in low-temperature protection mode.
Displays internal and external environmental conditions.
Shows supply and exhaust air volumes.
Indicates when the Cosmos module is connected.
Shows fault codes when the product is in failure.
Unit status when not actively running functions.
General operation modes for air volume settings.
Automatic mode for low outdoor temperatures.
High-performance mode for increased air exchange.
Procedure to reset filter maintenance indicator.
